Good Quality Hardened and Tempered Spring High Steel Carbon Steel Strip

• Customization: Available
• Type: Steel Strip
• Standard: AISI, ASTM, DIN, JIS, GB, BS
• Composition: Carbon Steel
• Technique: Hot Rolled
• Shape: Plate
• Surface Treatment: Galvanized
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
• Application: Flange Plate
• Width: 80-1500mm,Customized
• Thickness: 0.15-120mm or Can Be Customized
• Transport Package: in Bulk or 20', 40' Containers
• Specification: BS, DIN, JIS, AWWA, ANSI
• Trademark: SOLID
• Origin: Shanxi, China
• Production Capacity: 10000 Ton/Month

Product Description

Good Quality Hardened and Tempered Spring High Steel Carbon Steel Strip

65Mn: The steel is a commonly used spring steel. It has high strength, poor hardenability, low decarburization tendency, low price and good machinability. But there is overheating sensitivity, easy to produce quenching crack, and temper brittleness. It is widely used for making various flat and round springs, plate springs and spring sheets with small cross sections 65Γ(Russia),1065(US),080A67\EN43E(UK)2.70# steel has high strength, but low hardenability, suitable for manufacturing springs with small cross
section (φ≤15mm). Cold work hardening steel wire, in the cold state of winding forming, only for low temperature tempering,eliminate stress. The steel has good machinability and large quenching deformation. It is mainly used for non-quenched small spiral spring, spring sheet, elastic washer, stop ring, etc.
70(Russia),1070(US),060A72(UK),XC70(France)

T9A: The steel is high quality carbon tool steel and spring steel. After quenching and tempering, it has high hardness and toughness, poor hardenability, large quenching deformation and low plasticity. It is often used to manufacture tools and springs with high hardness and free from violent shock. C85W1(Germany),Y9A(Russia),W1-0.9C(US),Y190(France)

60Si2MnA: it is a very widely used alloy spring steel. The steel hardenability is good. It has high strength and elastic limit after quenching and tempering. Higher compressive strength ratio (б0.2/б B), anti-relaxation ability and tempering stability. If is thermal quenching is needed, its comprehensive performance is better. In particular, the fatigue life is improved obviously,but the decarburization tendency of the steel is large, and the cold deformation plasticity is low. The cutting is heavy. The thickness is less than 10mm for work below 250ºC. Diameter 25 mm all kinds of spring, spiral spring, safety valve spring, damping spring, instrument spring, etc.
60C2A(Russia);9260(US);SUP6(JIS);250A58,250A61,En45A(UK)

50CrVA: The steel is a high quality spring steel. With high proportional limit and strength, high fatigue and good plasticity and toughness, good tempering stability, when heated to 300ºC elasticity can still be maintained. The steel machinability is good. But the plasticity of cold working is poor. Poor walkability. Suitable for the manufacture of all kinds of important springs under high stress, the operating temperature does not exceed 400ºC.
50×Фa(Russia);6150(US);SUP10(JIS);735A50 En75(UK)50CV(France)
The Carbon Steel has high strength, good toughness, corrosion resistance, good welding and cold forming properties.
Steel plates are mainly used in buildings, bridges, ships, vehicles, boilers, high-pressure vessels,oil and gas pipelines, large steel structures, etc.
Steel plates are divided by thickness
Steel Thin sheet < 4mm (thinnest 0.2mm)
Medium thick steel plate 4 ~ 60mm
Extra thick steel plate 60 ~ 115mm

 

 

Product Name	Spring steel strip
Standard	AISI, ASTM, BS, DIN, GB, JIS,etc
Material	65Mn/50#/C75S/70Mn/En1.8159/SUP10/6150/EN1.7102/SK75 /CK67/51CRV4 /C80,etc
Special Use	High-strength Spring Steel
Application	Transport, construction, shipbuilding, gas containers, etc
Thickness	0.12-2.6mm,customized
Width	80-1500mm,customized
Hardess	43-49HRC
Heat treatment mode	Annealing,Cold hard,Annealing or high temperature tempering,760-780ºC,etc
Delivery Time	Stocks within 7 days, customized around 20 days.
Moq	3 ton

 

 

 

 

 

 

FAQ: 
1. Can I get free samples?

A: Yes, we can provide you the free samples, but you need to bear their own delivery costs.

2. Can I request to change the form of packaging and transportation?
A: Yes, We can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.

3. Can I request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.

4. Can I have my own Logo on the product?
A: Yes, you can send us your drawing and we can make your logo, but you have to bear their own the cost.

5. Can you produce the products according to my own drawings?
A: Yes, we can produce the products according to your drawings that will be most satisfy you.

6. Which price terms could accepted?
A: FOB,CIF all acceptable.